Norbazaar: rare and sundry Topre aftermarket housings
These rare, one-off, and factory-second offerings are in stock and available for shipment on a relatively short timeline (first time, first served), unless otherwise noted. Quality grading system is outlined below.
Please read each lot description carefully; order cancellations now carry a 3% processing fee due to Shopify no longer refunding fees on canceled orders.
More details on each design (Norbaforce, Heavy Grail, etc.) can be found on their respective product pages here in the shop.
Grading system
Factory seconds (B-stock and below) may or may not come in retail packaging.
B stock. Has surfaces that show subtle but discernibly non-uniform areas or small dents (typically along the bottom edge of parts) smaller than 5mm. B-stocks aren't easily distinguished from A Stock unless you go looking very closely for irregularities. These units are often able to be re-coated or re-polished up to a A stock condition through the use of third-party refinishing vendors.
C stock. Has non-uniform areas bigger than 5mm or dents more significant than B-stock. These units are often able to be re-coated or re-polished up to a B stock or even sometimes A stock condition through the use of third-party refinishing vendors.
D stock. Deep dents in the metal, deep gashes, or bends in the metal that cannot be easily hidden through refinishing.
F stock. Parts with form/fit problems, such as missing threads or deformations that prevent parts from fastening to each other normally.
Lot descriptions
Lot 131
Tactical Heavy Grail with Black switch plate. (A stock) Ships by next week.
Lot 129
Polycarbonate Data Pad (B stock). Comes with abrasive pads and ships by the end of the month.
Lot 128
K2 Data Pad (C stock). Ships by the end of the month.
Lot 127
Polycarbonate Heavy-9 (B stock) Ships by the end of the month.
Lot 126
Mirror Polished PVD Black Heavy-6 (C stock). Ships by the end of the month.
Lot 125
Matte PVD Black Heavy-6 (A stock). Ships by the end of the month.
Lot 124
Black Powder Coat Heavy Grail Pro 3 (C stock) Ships with a white switch plate by the end of the month.
Lot 123
Harvard Square Heavy Grail Pro 3 (C stock) Ships with a white switch plate by the end of the month.
Lot 122
Sunset Blvd Heavy Grail Pro 2 (C stock) Ships with a white switch plate by the end of the month.
Lot 121
Periwinkle Heavy Grail Pro 2 (C stock) Ships with a white switch plate by the end of the month.
Lot 120
K2 Heavy Grail Pro 2 (B stock). Ships with a white switch plate by the end of the month.
Lot 119
K2 Heavy Grail Pro 2 (B stock). Ships with a white switch plate by the end of the month
Lot 118
Veracity Steel Data Pad (B stock). Ships by the end of the month.
Lot 117
Veracity Steel Heavy Grail Pro 3 (B-stock). Ships mid-April.
Lot 116
Veracity Steel Data Pad (A-stock). Ships mid-April.
Lot 115
Unfinished Heavy Grail (C-stock). Unfinished rear cover plate. Ships mid-April.
Lot 114
Sunset Blvd Pro 2 - Stainless Steel (A stock). This was a bespoke one-off that wasn’t offered in the original pre-order. White rear cover plate. Ships mid-April.
Lot 113
Matte, Powder Coated Black Data Pad (A stock). These units were a test for a different texture. Similar to a cerakote or anodized black in terms of texture, and looks. Ships in May.
Lot 112
K2 Data Pad (B-stock). Ships early late May.
Lot 111
Aerospace (Silver Anodized) Data Pad (A-stock). This is a bespoke finish that wasn’t offered in the original pre-order. White rear cover plate. Ships late May.
Lot 110
Veracity Steel Data Pad (C-stock). Representative photos here. There is no coating, so you could always get it re-polished by a local mirror polishing shop to get it up (or closer) to A-stock. These can also be powder coated. Ships late May.
Lot 109
Polycarbonate Data Pad w/unfinished rear cover plate (C-stock). Ships late May.
Lot 108
Enigma Black Data Pad (A-stock). Ships late May.
Lot 107
Polycarbonate Data Pad (A- stock). This is a bespoke finish that wasn’t offered in the original pre-order. Comes with abrasive pads. We're constantly improving and evolving our polycarbonate finishing process, so the material and surface finish of some previous batches of our products may not precisely match this one. This one represents the best cosmetic quality yet.
Lot 106
K2 Heavy Grail Pro 3 (B-stock). Pink switch plate. Ships early March.
Lot 105
Frosted Polycarbonate Pro 3 Heavy Grail (A-stock). White switch plate. Ships early June.
Lot 104
K2 Heavy-9 with off-white rear cover plate (C-stock). Ships first half of February.
Lot 103
K2 Heavy-9 with off-white rear cover plate (B-stock). Ships first half of February.
Lot 102
Black Heavy Grail Switch Plate (A-stock). We ask that clients limit themselves to purchasing five or fewer plates across both colors. Orders placed after April 17 will ship in May.
Lot 101
White Heavy Grail Switch Plate (A-stock). We ask that clients limit themselves to purchasing five or fewer plates across both colors. Orders placed after April 17 will ship in May.
Lot 100
Frosted Polycarbonate Norbatouch (C-stock)
Lot 99
Sunset Blvd Heavy-6 (D-stock). Best to get this chemically stripped by a local powder coating shop and refinished to a color/texture of your choice.
Lot 98
K2 Heavy-9 (D-stock). Best to get these chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Ships first half of February.
Lot 97
Sunset Blvd Heavy Grail Pro 3 (D-stock). Best to get these chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 96
Sunset Blvd Heavy Grail Pro 2 (D-stock). Note that this is for the older Pro 2 HHKB only. Best to get these chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 95
Tactical Heavy Grail Pro 3 (B-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 94
Aerospace Heavy Grail Pro 3 (C-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 93
Aerospace Heavy Grail Pro 3 (B-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships mid-to-late June.
Lot 92
Frosted Polycarbonate Heavy Grail (D-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 91
Frosted Polycarbonate Heavy Grail (C-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 90
Frosted Polycarbonate Heavy Grail (B-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 89
Periwinkle Heavy Grail Pro 3 (D-stock). Best to get these chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 88
Periwinkle Heavy Grail Pro 3 (C-stock). Best to get these chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 87
Periwinkle Heavy Grail Pro 3 (B-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 86
K2 Heavy Grail Pro 3 (D-Stock). Best to get these chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 85
K2 Heavy Grail Pro 3 (C-stock). You may prefer to get yours chemically stripped by a local powder coating shop and refinished to a color/texture of your choice. Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 84
K2 Heavy Grail Pro 3 (B-stock). Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.) Ships early March.
Lot 83
Norbaforce Mark III in Aerospace (A-stock, in retail box with product passport). Textured white rear cover plate. Realforce R2 breakout PCB included only. These last Norbaforces are currently being made to prevent our remaining parts going to waste . They will ship in the spring. Mark III is same as Mark II except that you can add/remove the risers without having to remove the bumpons. Order placed after May 27 will ship late June (waiting on rear cover plates).
Lot 82
Heavy Grail Pro 3 in Aerospace with white switch plate and textured white rear cover plate (A-stock, in retail box with product passport). Available over on the HG product page. These last housings are currently awaiting rear cover plates. Remaining orders placed in June will go out by the end of the month.
Lot 81
Enigma Black Data Pad (B-stock). Textured black power coat. In stock but will be packed and shipped in January.
Lot 80
Frosted polycarbonate Heavy-9 (A-stock, in retail box with product passport). These housings are currently in production to help us close out our balance of spare Heavy-9 parts without wasting anything. Note: these won't ship until the spring!
Lot 79
Tactical Heavy-6 (F-stock). With white rear cover plate. South, right-most screw hole is stripped, but otherwise attaches just fine. In stock but will be packed and shipped in January.
Lot 78
Tactical Heavy-6 (D-stock). Black anodized with white rear cover plate. In stock but will be packed and shipped in January.
Lot 77
Tactical Heavy-6 (C-stock). Black anodized with white rear cover plate. In stock but will be packed and shipped in January.
Lot 76
K2 Heavy-9 (C-stock). With white rear cover plates. In stock but will be packed and shipped in January.
Lot 75
K2 Heavy-9 (D-stock). With white rear cover plate. In stock but will be packed and shipped in January.
Lot 74
Aperture Heavy-9 (D-stock). With white rear cover plate. In stock but will be packed and shipped in January.
Lot 73
Aperture Heavy-9 (C-stock). With white rear cover plate. In stock but will be packed and shipped in January
Lot 72
Sunset Blvd Heavy-6 (C-stock). In stock but will be packed and shipped in January.
Lot 71
Urbi et Orbi edited (frosted polycarbonate) Heavy-6. D-stock. White rear cover plate.
Lot 70
Urbi et Orbi (frosted polycarbonate) Heavy-6. C-stock housing, B-stock rear cover plate. Gray logo badge. White rear cover plate. Includes parts pack, abrasive pads, but no acoustic dampener. These housings were C-stocked because they exhibit a weird behavior when held under very bright light upside down, a pattern becomes visible that isn't otherwise. (We were concerned that some people might use these with LED under-lighting, which would make the pattern visible.)
Lot 69
Urbi et Orbi edition (frosted polycarbonate) Heavy-6. C-stock housing, B-stock rear cover plate. Gray logo badge. Black rear cover plate. Includes parts pack, abrasive pads, and acoustic dampener. These housings were C-stocked because they exhibit a weird behavior when held under very bright light upside down, a pattern becomes visible that isn't otherwise. (We were concerned that some people might use these with LED under-lighting, which would make the pattern visible.)
Lot 68
Urbi et Orbi edition (frosted polycarbonate) Heavy-6. C-stock housing, B-stock rear cover plate. Gray logo badge. White rear cover plate. Includes parts pack, abrasive pads, and acoustic dampener. These housings were C-stocked because they exhibit a weird behavior when held under very bright light upside down, a pattern becomes visible that isn't otherwise. (We were concerned that some people might use these with LED under-lighting, which would make the pattern visible.)
Lot 67
Urbi et Orbi edition (frosted polycarbonate) Heavy-6. B-stock. Gray logo badge. Black rear cover plate. Includes parts pack, abrasive pads, and acoustic dampener.
Lot 66
Urbi et Orbi (frosted polycarbonate) Heavy-6. B-stock. Gray logo badge. White rear cover plate. Includes parts pack, abrasive pads, and acoustic dampener.
Lot 65
Veracity Steel Heavy Grail Pro 2. F-stock. An otherwise A-stock housing but with broken threads at south rear cover plate screw holes (screws don't screw in all the way), but it is still perfectly usable without those screws; you may wish to add a small strip of thin foam or gasketing material around the plate to prevent any vibration in that area if you find that any is present when typing forcefully. Includes everything except credential folio.
Lot 64
PVD Black Stainless Steel Norbatouch without risers. A failed finishing experiment due to only partial coverage, but would be easy to coat with Cerakote/powder. Effectively F-stock because there are no threads on the USB connector holes, so you'd need to epoxy your USB connector into place or use some M2 screws and nuts to hold it into place. Images here.
Lot 63
Frosted polycarobate Norbatouch Mark II. C-stock. Does not include wool acoustic dampener. This unit is an early finishing test with a more granular finish than the more satin finish used on the production units.
Lot 62
Frosted polycarobate Norbatouch Mark II. C-stock. Does not include wool acoustic dampener.
Lot 61
Frosted polycarobate Norbatouch Mark II. C-stock. Includes wool acoustic dampener.
Lot 60
Frosted polycarobate Norbatouch Mark II. B-stock. Includes wool acoustic dampener.
Lot 59
Tatctical Black Anodized Norbatouch Round Pi. C-stock. Does not come with risers, so it must be used flat (which is the designer-preferred method, fwiw). Includes parts pack and acoustic dampener.
Lot 58
Lot 57
Brushed Stainless Steel Heavy Grail Pro 3. A-stock. Includes everything. Smooth/unfinished rear cover plate, ready for powder coating or leaving raw for a more industrial motif. Images here.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 56
Smooth finished Stainless Steel Heavy Grail Pro 3. B-stock. Smooth/unfinished parts ready for powder coating. Includes everything except credential folio. Images here.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 55
GOCF Norbaforce Mark III. B-stock. Black rear cover plate. No dampener and no passport. Parts pack included.
Lot 54
GOCF Heavy Grail Pro 3. D-stock. Includes everything except credential folio.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 53
Ghost-of-Chrismtas-Future (Frosted Polycarbonate) Norbaforce Mark III. C-stock. White rear cover plate. No dampener and no passport. Parts pack included.
Lot 52
Smooth Finish Stainless Steel Pro 3 Heavy Grail. A-stock. K2 rear cover plate. Uncoated/raw and sanded to a smooth matte finish, ready for coating or lovely as it is.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 51
Veracity Steel Heavy Grail Pro 3. D-stock. Dents around the housing + scratches. Images here. Includes everything except credential folio.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 50
K2 Heavy-9. B-stock. Includes everything except credential folio.
Lot 49
Veracity Steel Heavy Grail Pro 2. B-stock. Includes everything except credential folio. Images here.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 48
Black-and-White Norbaforce Mark II. B-stock. K2 housing with black texture rear cover plate & black anodized risers. Includes everything else except credential folio. Images here.
Lot 47
Waxed solid Copper Patina Heavy-6. A-stock housing with slightly blemished white rear cover plate (small chip near screw hole). White logo badge and rear cover plate. Includes Credential Folio & dampener. This a renewable, waxed living finish that can either be kept as a pristine display piece, or will change and darken over time with use and touch. Images here.
Lot 46
PVD Black Stainless Steel Heavy Grail Pro 3 in matte finish.
C-stock. Various discolorations & spots around housing, partial coverage but otherwise a good smooth base for another coating like cerakote/powder. Includes Credential Folio, dampener, and microfiber cloth. Images here.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 45
PVD Black Stainless Steel Heavy Grail Pro 2 with mirror finish.
B-stock. Includes Credential Folio, dampener, and microfiber cloth. Images here.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 44
Veracity Steel Heavy-6. A-stock. Includes everything.
Lot 43
K2 Heavy Grail in Pro 3. B-stock. Includes everything except credential folio.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 42
Veracity Steel Heavy-9. A-stock. Includes everything.
Lot 41
Ghost-of-Christmas-Future (Frosted Polycarbonate) Norbaforce Mark III. B stock. White rear cover plate. No dampener and no passport. Parts pack included.
Lot 40
Ghost-of-Christmas-Future (Frosted Polycarbonate) Heavy Grail Pro 3. B stock. Includes everything except credential folio.
Comes with Norbauer Pink switch plate (some minor color fading present at edges on these switch plates but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 39
Ghost-of-Christmas-Future (Frosted Polycarbonate) Norbaforce Mark III. C-stock. Includes everything except credential folio. Comes with white rear cover plate.
Lot 38
Ghost-of-Christmas-Future (Frosted Polycarbonate) Norbaforce Mark III. C-stock. Includes everything except credential folio. Comes with black rear cover plate.
Lot 37
Ghost-of-Christmas-Future (Frosted Polycarbonate) Norbaforce Mark III. B-stock. Includes everything except credential folio. Comes with white rear cover plate.
Lot 36
Tactical Norbaforce Mark III. A-stock.
Lot 35
One-off carbon steel Heavy-6 with clear-coated rust finish. A stock. Insanely heavy. Black rear cover plate. White logo badge, acoustic dampener, & credential folio.
Lot 34
Raw Aluminum Norbaforce Mark III. This is as it comes fresh out of the CNC mill, with standard milling patterns, some of which have been lightly sanded away in a couple of spots. Comes with unfinished risers, white rear cover plate, dampener, & credential folio. Can be used as-is for a cool raw/industrial look or powder coated/cerakoted by a local vendor of your choice.
Lot 33
Heavy Grails Pro 3 in K2 finish. B-stock. Includes everything except credential folio. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 32a-32g
Veracity Steel Heavy Grails in Pro 3 and Pro 2 variants and various finish quality grades. See this page for each specific unit for sale and its condition. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 31
Frosted polycarbonate Heavy-6. B-stock. Includes everything except credential folio.
Lot 30
Veracity Steel Heavy-6. B-stock. Everything included except for credential folio. Photos of this specific unit are here.
Lot 29a-29e
Factory-second Veracity Steel Norbaforces. Most can likely be refinished by a competent polishing vendor. Specific item details and photos here.
Lot 28
Periwinkle Heavy Grail Pro 3. A-stock. Includes everything. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 27
Sunset Blvd Heavy Grails Pro 3. B-stock. Includes everything except credential folio. Comes with white switch plate.
Lot 26
Urbi et Orbi Heavy-6. B-stock. Includes everything except credential folio
Lot 25
Heavy-9 in Aperture finish. A-stock.
Lot 24
Norbaforce Mark II in K2 finish. F stock. Will include either a stripped rear cover plate screw hole or riser screw hole. You can still fasten these parts together and use the board without all the screws, however. Both have slight imperfections and dimples, basically these would B stock without the stripped holes. Includes everything except credential folio
Lot 23
Sunset Blvd Pro 3 Heavy Grail. A-stock. Includes everything. White switch plate.
Lot 22
K2 Norbaforce Mark III. C-stock. Includes dampener, parts pack, risers
Lot 21
Aperture Pro 3 Heavy Grail. A-stock. Includes everything. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 20
Tactical Black (hard anodized) Heavy-6. A-stock. Includes everything.
Lot 19
A solid copper Heavy-6. A-stock. White logo badge and rear cover plate.
Includes Credential Folio & dampener. This a renewable, waxed living finish that can either be kept as a pristine display piece, or will change and darken over time with use and touch.
Lot 18
Norbaforce Mark II in textured white/gold experimental finish. A-stock. Includes everything except for risers, so you would need to be someone who uses his Norbaforce flat (no typing angle), which for whatever it's worth is the way the housing is really designed to be used anyway. This finish was experiment and we just forgot to include risers with the coating. Done in this experimental color from Prismatic Powders.
Lot 17a-17c
Lot 16
Pro 3 Heavy Grail in Enigma Black. A-stock. This rare finish was never offered as part of the official drops. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 15
Heavy Grail Pro 3 in Sunset Blvd. B-stock (very good, nearly A-stock). White switch plate.
Lot 14
Heavy Grail Pro 3 in VHS. A-stock. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 13
A small restock of the Norbaforce Mark II in VHS and K2 can be purchased directly on the corresponding original product page. A-stock.
Lot 12
A small restock of the Heavy-6 Urbi et Orbi edition (frosted polycarbonate) can be purchased directly on the corresponding original product page. A-stock.
Lot 11
Solid copper (extremely heavy) Heavy-9 with powder clear coat. B stock. Small dents in the metal before coating and some small abrasion spots in the clear coat. This could be chemically stripped and clear coated again if one cared to (and had a careful powder coating vendor doing the work). High-res image here. Black rear cover plate.
Lot 10
Pro 2 Heavy Grail in Enigma (texture) Black finish. A stock. Not compatible with Pro 3 HHKBs. This rare finish was never offered as part of the official drops. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 9
Pro 2 Heavy Grail in Aperture (silver + gray texture) finish. A stock. Not compatible with Pro 3 HHKBs. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 8
Pro 2 Heavy Grail in K2 (texture white) finish. A stock. Not compatible with Pro 3 HHKBs. Norbauer Pink switch plate (some minor color fading present at edges on these but is scarcely discernible after assembly since the plate edges are hidden by the keyboard frame and keycaps.)
Lot 7
F-stock Aperture Heavy-9. Powder coating is too thick around rear cover plate opening so rear cover plate doesn't seat properly enough to be fastened. Everything else is perfect. Recoating can likely be done on this unit up to an A-stock condition.
Lot 6
Norbaforce Mark III in Tactical (Hard Anodized) Black. A-stock. Shown below with a JIS layout, but works with any R2 or 87U-style TKL Realforce.
Lot 5
A limited new finish for of the Heavy-9 in Aperture, separately available on the Heavy-9 page here.
Lot 4
"River Finish" Retro Refrigerator Heavy-9. B stock. Various small dents (smaller than 3mm each) throughout the housing. Housing is coated in River Finish Retro Refrigerator while rear cover plate (not visible during typing) is coated in Matte Retro Refrigerator, therefore exhibiting two different textures.
Lot 3
Limited-edition Heavy-9 in frosted polycarbonate. First-quality (A Stock). Each unit comes with an acoustic dampener and credential folio.
Lot 2
Limited-edition solid copper Heavy-9 in hand-applied verdigris patina finish. Comes with White Rear Cover Plate. A museum piece. Each stochastic finish will be unique. Comes with textured white rear cover plate, acoustic dampener, and credential folio. First-quality (A Stock). These have a renewable, waxed living finish that can either be kept as a pristine display piece, or will change and darken over time with use and touch.
Lot 1
